FRAL Refrigerant Dehumidifier FDW62

  • Pump can be fitted for lifting condensed water
  • Two speed fan
  • Digital control of humidity and defrost
  • Digital display
  • Protection IP22 (added protection for corrosive areas)
  • Low noise
  • Low power consumption
  • Rotary compressor
  • Power supply 220-240V 50Hz

 

Specification Sheet (PDF)
Manual (PDF)

Get expert help.  Call (02) 6584 2511.

Product Information

The FDW62 dehumidifier is a purpose-built elegant but powerful dehumidifier ideal for corrosive environments including indoor heated pools, laboratories, etc.  This dehumidifier is powder-coated inside and outside at the factory and receives an additional internal rust protection treatment before leaving our workshop.  Not all dehumidifiers available in Australia are finished to this standard.

The large volume of dry air this unit is capable of producing (600m³/hr) ensures the area is kept at optimal humidity levels.  This model can be fitted with a water pump to allow collected water to be pumped to a remote point – very handy!

Fral FDW62 various views

Warranty:  2 years 

TECHNICAL DATA

Power Consumption (at 27˚C, 65% rh) 700 w
Power Consumption (at 35˚C, 95% rh) 950 w
Absorbed Current (at 35˚C, 95% rh) standard ver. 4.4 A
Start Current Full Load Amp 20 A
Air Flow 600 cm/h
Noise level (at 3 meters) 49 dB
Refrigerant R407c
Defrosting Control Electronic
Continuous Drainage Pipe (male) 19mm
Temperature Range standard version 7-35˚ C
Relative Humidity Range 45-99%
Condensation Capacity (at 26˚C, 60% rh) 52 l/24 hr
Condensation Capacity (at 32˚C, 90% rh) 62 l/24 hr
Weight 48 kg
Dimensions 78cm x 68cm x 25cm

CONDENSED WATER AT DIFFERENT AMBIENT TEMPERATURE AND HUMIDITY CONDITIONS

10˚C
60%
10˚C
80%
15˚C
60%
15˚C
80%
20˚C
60%
20˚C
80%
25˚C
60%
25˚C
80%
27˚C
65%
27˚C
80%
30˚C
80%
32˚C
90%
10 l/d 18 l/d 15 l/d 23 l/d 20 l/d 28 l/d 25 l/d 35 l/d 28 l/d 39 l/d 52 l/d 62 l/d

Ask Us About Our Dehumidifiers

Our team are experts in all things humidity and are happy to assist in selecting the correct model(s) for your application.