FRAL Refrigerant Dehumidifier FSW96

The FRAL FSW96 is a purpose-built refrigerant dehumidifier engineered specifically for potentially corrosive environments where standard units would fail. Designed for facilities like indoor heated pools and laboratories, this unit operates reliably down to 1°C when using the hot gas version and delivers 750m³/hr of dry air with exceptional build quality.

Key Features

• Factory powder-coated inside and outside with additional internal rust protection treatment for superior corrosion resistance
• Digital microprocessor control with display for precise humidity monitoring and adjustment
• Flexible installation options with wall or floor mounting capability and short duct compatibility
• Two-speed fan operation for optimised performance and low noise levels
• Low power consumption design with optional condensate pump for elevated drainage

Typical Applications

This unit is ideal for commercial facilities with corrosive conditions including indoor swimming pools, laboratories, and other heated environments where standard dehumidifiers cannot withstand the conditions. The robust construction and corrosion-resistant finish make it suitable for demanding industrial and commercial humidity control applications.

The FSW96 is built to a high standard and works down to 1˚C when using the hot gas version. It is an elegant purpose-built and powerful dehumidifier ideal for potentially corrosive environments including indoor heated pools, laboratories, etc.

These dehumidifiers are powder-coated inside and outside at the factory and receive an additional internal rust protection treatment before leaving our Moisture Cure workshop. Very few dehumidifiers available in Australia are finished to this standard.

The large volume of dry air this unit is capable of producing (750m³/hr) ensures the area is kept at optimal humidity levels. It can be fitted with a water pump to allow water collected to be pumped to a remote point – very handy! This model unlike most others requires hard-wiring.

 

Warranty:  2 years

TECHNICAL DATA

Power Consumption (at 27˚C, 65% rh)	980 w (hard wired)
Power Consumption (at 35˚C, 95% rh)	1350 w (hard wired)
Absorbed Current (at 35˚C, 95% rh) standard ver.	7.2 A
Start Current – Full Load Amp Standard  Version	29
Air Flow	800 cm/h
Noise level (at 3 meters)	49 dB
Refrigerant	R407c
Standard Defrosting Control System	Electronic
Continuous Drainage Pipe (male)	19mm
Temperature Range standard version	7-35˚ C
Relative Humidity Range	40-99%
Condensation Capacity (at 30˚C, 80% rh)	80 l/24 hr
Condensation Capacity (at 32˚C, 90% rh)	96 l/24 hr
Weight	72 kg
Dimensions	500cm x 290cm x 1750cm
Water Heating Coil Capacity (ambient 27˚C, Water 70/60˚C	4.5 kW
Electric Heater Capacity	4 kW
Heat Recovery in Water	2.44 kW

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONDENSED WATER AT DIFFERENT AMBIENT TEMPERATURE AND HUMIDITY CONDITIONS